+86-532-68072940
+86-532-85612592
It is designed for the corrosion protection of new and existing pipelines. The coating layer consists of a tough, woven polypropylene backing with a high tack butyl rubber adhesive.
It’s also used for both metallic pipelines and waterproofing works against outdoor bad weathers .
Products List
Contact Us
Products > Anticorrosion Tapes > Polyethylene anti-corrosion tape
|
PP Woven Tape
Item No.: Conet-54 |
Description
Structures:
Excellent adhesion to pipe and self
Flexibility provides extra protection at vulnerable areas
Compatible with common pipe coatings
Excellent resistance to cathodic disbonding
Can be applied over a wide temperature range
Good conformability and consistent uniform thickness
Heavy duty butyl bitumen compound adhesive ensures a strong bond & impervious seal.
Uses:
Waterproofing membrane for basements,sub structures and flat deck applications. plazas, bridge, vehicular traffic structures, or parking decks overlaid with an asphalt concrete wearing course.
Tough, high performance waterproof membrane for critical substructures and civil engineering works.
Provides a vapor and waterproof membrane to water excluding structures and protects concrete from attack by aggressive ground salts.
Protection for wall ,floor, roof, corner, basement etc. to against from attack by bad weather, rain, acid alkaline salt.
Pipelines protection
Weld joints
Bends
Fittings
Bare pipe lengths
Pipe rehab and repair
Bare pipe length
Line travel pipelines
Technical Datas:
|
UNIT |
TEST METHOD |
TYPICAL VALUES |
|||||
|
|
G50 |
G60 |
G65 |
||||
|
Total thickness |
mil |
ASTM D 1000 |
40mils |
50mils |
60mils |
65mils |
|
|
Tensile Strength |
lb/in |
ASTM D 1000 |
30(5kg/cm) |
35(6.3kg/cm) |
39(7kg/cm) |
42(7.5kg/cm) |
|
|
Length |
|
|
25mtrs |
20mtrs |
15mtrs |
10mtrs |
|
|
Width |
|
|
2”,4”,6”,9” |
||||
|
Peel adhesion To primed pipe |
oz/in |
ASTM D 1000 |
269(3kg/cm) |
296(3.3kg/cm) |
314 (3.5kg/cm) |
340(3.8kg/cm) |
|
|
To backing |
oz/in |
ASTM D 1000 |
90(1kg/cm) |
90(1kg/cm) |
117(1.3kg/cm) |
135(1.5kg/cm) |
|
|
Dielectric Strength |
KV/mm |
ASTM D 1000 |
42 |
42.6 |
43 |
43.8 |
|
|
Volume Resistivity |
ohm·m |
ASTM D 257 |
2.5 X 1012 |
2.5 X 1012 |
2.5 X 1012 |
2.5 X 1012 |
|
|
Water Vapor Transmission Rate |
g/ m2 /24h |
ASTM E 96 |
0.06 |
0.05 |
0.03 |
0.02 |
|
|
Water Absorptivity |
% |
ASTM D 570 |
0.1 |
0.1 |
0.1 |
0.1 |
|
|
Application Temperature |
°F |
|
-31-+160 (-35-+70℃) |
||||
|
Max service temperature |
°F |
|
-40-+176 (-40-+80℃) |
||||
|
|
|
|
|
||||
