Products > Pavement Marking Tape > PL1000 ANTI-SKID TAPES
PL1000 ANTI-SKID TAPES
Item No.: conet 110

Features :  
Good anti-skid; wear resistance, high tensile ; strong weather resistance;economical and simple application .
Application:
It is suitable for various spatial stair and other special area floor's anti-skid conduct. Such as playgrounds, public place of entertainment ,ramps and sidewalk,  pool areas, supermarket, work areas, stairways, snowmobiles, scooters, construction machinery, vehicles, machine shops, hazardous floors, industrial equipment, lawn equipment, trucks and trailers.
   
 

Description
Description:
 
PL1000 anti-skid tapes are tough & durable provides an excellent skid resistance because of the grips provided by the grit surface of the tape. Constructed of mineral coated plastic film and then top coated with a thick spread of silicon oxide grit is coated with pressure sensitive adhesive protected by a release liner on the back side.
 
Features :  
 
Good anti-skid; wear resistance, high tensile ; strong weather resistance;economical and simple application .

Application:
 
It is suitable for various spatial stair and other special area floor's anti-skid conduct. Such as playgrounds, public place of entertainment ,ramps and sidewalk,  pool areas, supermarket, work areas, stairways, snowmobiles, scooters, construction machinery, vehicles, machine shops, hazardous floors, industrial equipment, lawn equipment, trucks and trailers.
 
Technical Data:
 
Compatibility Painted wood、painted metal、concrete、asphalt、porcelain、fiber glass
Color Black, red, yellow, blue
Application temperature Above 10℃
Performance time At least 1 year under 22℃/50% RH
Standard Dimension Standard length: 18m
 
Standard width: 5mm
 
Or according to customer's requirement.
Cohesiveness 16 N/25mm Testing Method: GB/T 24717
Thickness 0.8mm Testing Method: GB/ 7125

 

 
Normal Specification:
 
    Standard length: 10m
 
    Standard width: 2.5cm, 5.0cm    Cut according to customer's request size.
 
    Product with release paper
 
Application Methods:
 
1、Apply tape only to a clean, dry, grease & dust free surface. Coated with P120 contact adhesive if needed.
 
2、Cut the tapes according to your need, peel off the release liner.
 
3、Press firmly into position to obtain maximum adhesion from the adhesive. You can get the best adhesion at 23C. At low temperatures, there is a chance of condensation forming, and the tack of the adhesive can be reduced.
 
4、Use rubber roll or rubber ramp to press.
 
Important notice:  The information, data and other statements are based on our testing results

 

Qingdao Conet Technologies Co., Ltd.
Conettape Factory

Address: Liuting Industrial Zone,
Chengyang Distict, Qingdao, China
Phone: +86-532-68072940Fax: +86-532-85612592

E-mail: marketing@conettape.com 

Sales Manager

Contact: Ms. carol
E-mail: marketing@conettape.com
Skype: conet.carol 

Facebook Twitter Pinterest LinkedIn Addthis
© 2024 Qingdao Conet Technologies Co., Ltd. www.conettape.com All rights reserved. Supported by elut.cn