Application:
The role of the Spray adhesive machine is to inject pretreatment glue before laying the tape to highway. So you could
reduce the glue waste and prevent the tape fall off easily. This machine can human implementation, also it can connect
SDH-200-T battery drive vehicle formed mechanical construction for mechanical construction.
Main structure :
This machine is including the bodywork, Gasoline generator. High-pressure spray pump, glue barrels, Spray gun.
Specifications:
a.Generator output power 2500W
b. High-pressure spray pump
Motor power 1400W
Pump capacity 2.4 L/min.
Pump Max Output pressure 25 Mpa.
c. With 2 spray guns. Equipped with reverse decontamination nozzle.
On-site exclude jams convenient and fast.
Operate instructions:
a. Place the spray adhesive machine into the work site, pour the glue into
the glue barrels then insert the suction tube to the glue barrels.
b. Start generator, open the pump exhaust valve on. After exhausting the
gas, close the exhaust valve.
c. Moving the spray adhesive machine to proper position. Adjust the marking
rod to the alignment marking lines. By holding the Brake handle, you could
spry the glue.
d. By changing the gun height can adjust spraying glue width, to adapt the
tape width.
e. Take off the spray gun can do great distance free spraying
5、Cautions:
a. This machine should far from sparks and Fire
b. After finishing work, please clean the pump and spry guns
+86-532-68072940
+86-532-85612592
