1.Product Description
This product is made of aluminium foil Mylar/composite film/fluorocarbon film , butyl polymer self-adhesive layer,isolation film composite. Aluminium film, composite film, fluorocarbon film itself has a certain degree of weather resistance, abrasion resistance, and can be effectively combined with the butyl adhesive layer. The adhesive layer is mainly made of imported polymer polymers, with other additives and fillers, according to a special production formula.

2.Application

Suitable for sunroom, window balcony, cement cracks, colour steel tile roof and other scenes of waterproof repair.

3.Product features

(1), does not contain any solvent, safe and environmentally friendly;
(2) Strong bonding, can be laminated with a variety of materials;
(3),has excellent chemical resistance, weather resistance and corrosion resistance;
(4),self-adhesive cold construction, construction is convenient;
(5)Cost advantage

4.Technical Parameters

(1) Density: 1.1~1.6 g/cm3;
(2),heat resistance: 100 ℃, 2h no flow, cracking, deformation;
(3) Low-temperature bending: -30℃ without cracks;
(4)elongation: > 400% (butyl rubber layer)

5ã€ÂUse method
(1), clean up the base surface, require dry, clean and no oil, no floating ash on the surface;
(2), according to the need to cut the length;
(3), remove the release film, according to the need to lay the tape, and pressure, compaction;
(4), after 24h to achieve the best waterproof effect.
6ã€ÂPackaging and Storage
(1),roll packaging (common specifications: 1mm * 5cm * 5m, 1mm * 10cm * 5m)
(2), Storage conditions: stored in a cool, dry, well-ventilated and sunlight can not be directly irradiated place.
(3) Shelf life: 24 months under the specified storage conditions and temperature.

Remarks:
Product thickness: 0.5~2.0mm Product width:≤1200mm
Commonly used substrates: silver square, glossy aluminium film, composite film, ordinary fluorocarbon film, super-resistant fluorocarbon film, TPO