This product is a one-component butyl rubber made of self-adhesive waterproof sealing tape through advanced technology, the metal, wood, plastic, etc. have good adhesion, but also has excellent weather resistance, airtightness and watertightness, the surface of the adhered object to play a waterproof sealing, vibration damping and protection.
Butyl double-sided adhesive tape
Item No.: Conet 104 |
1.Product Description
This product is a one-component butyl rubber made of self-adhesive waterproof sealing tape through advanced technology, the metal, wood, plastic, etc. have good adhesion, but also has excellent weather resistance, airtightness and watertightness, the surface of the adhered object to play a waterproof sealing, vibration damping and protection.
2.Product use
It is used for the mutual lap joint between light steel roofing colour steel plate, light board, steel plate and steel plate, and the mutual lap joint between waterproof breathable membrane and air-insulating membrane. Tear off the release paper on the surface of the tape, install it after aligning the other object to be lapped, and compact it to ensure that the tape and the surface of the adhered object are tightly bonded. It is also suitable for waterproofing of wooden and metal roofs.
3.Product features
(1), does not contain any solvents, safe and environmentally friendly;
(2) Strong adhesive properties, can be laminated with a variety of materials;
(3) Excellent chemical resistance, weather resistance and corrosion resistance;
(4), no binder, easy to construct.
(5), has the advantages of convenient and quick to reduce the construction cycle, accurate dosage, reduce waste and so on.
4.Product technical parameters
(1) Density: 1.1~1.6 g/cm3;
(2), heat resistance: 100 ℃, 2h without flow, cracking, deformation;
(3) Low-temperature bending: -40℃, no cracks;
(4) Elongation: >400%.
5.Use method
(1), grass-roots level Overlap edge, dry, clean, no oil, no floating ash on the surface;
(2), according to the need to cut the length;
(3), remove the release paper or isolation film, according to the need to lay the tape, and press and compact;
(4), once pasted in place, after 24h to achieve the best waterproof effect.
6.Packaging and storage
(1) Roll packaging (commonly used specifications: 0.8mm * 80mm * 40m,2*20mm*20m)
(2) Storage conditions: stored in a cool, dry, well-ventilated and sunlight can not be directly irradiated place.
(3) Shelf life: 24 months under the specified storage conditions and temperature.